ALL PSU SELECTOR TABLE.

Configurable Output AC-DC Power Supplies
200, 400, 600, 700, 1000 Or 1200 Watt Options.

* 1~12 User Configurable Isolated Outputs
* 2 Chassis Sizes (4 or 6 Output Module Slots)
* True Medically Approved Version EN60601
* 1.45 To 58 Volts From Standard Modules
* Module Series Operation To Over 100 Volts
* Module Parallel Operation To 1200 Watts
* Class B Conducted Emissions
* Control Signals On Each Output
* Global Signals For Complete Unit
* Ultra Compact Footprint, 1U Profile
* 3 Year Warranty
* Short Lead-time, Competitive Pricing.

Please Contact ALL PSU Sales Office For Data And Best Output Configuration
To Meet Your Output Requirements From Any Of The Units Listed Below.

Units Are Available In 4 Module Slot Versions At Up To 200, 400 or 600 Watts
Or 6 Module Slot Versions At Up To 400, 700, 1000 Or 1200 Watts.

All Models Are Also Available As Medically Approved EN60601 Versions.

Chassis Versions
(Please Scroll Down For Output Modules).

Maximum Output Power Maximum Number Of Output Modules
(From 1 to 6) 		Number Of Separate Isolated Outputs.  Customer Specified
200 Watts 4 1 to 8
400 Watts 4 1 to 8
600 Watts 4 1 to 8
400 Watts 6 1 to 12
700 Watts 6 1 to 12
1000 Watts 6 1 to 12
1200 Watts 6 1 to 12
Output Modules.

Single Output Modules

 Nominal Output Adjustment Range Maximum Current
Module 1 1 Slot Width 2.5 Volts DC 1.5~3.6 Volts 50 Amps
Module 2 1 Slot Width 5 Volts DC 3.2~6 Volts 40 Amps
Module 3 1 Slot Width 12 Volts DC 6~15 Volts 20 Amps
Module 4 1 Slot Width 24 Volts DC 12~30 Volts 10 Amps
Module 5 1 Slot Width 48 Volts DC 28~58 Volts 6 Amps
Module 7 1 Slot Width 24 Volts DC 5~28 Volts 5 Amps
Dual Output Modules Nominal Output Adjustment Range Maximum Current
Module 8 1 Slot Width 24 Volts DC
24 Volts DC 		5~28 Volts
5~28 Volts		 3 Amps
3 Amps

Notes :
Blanking Plates Are Fitted Over Any Unused Output Module Slots.
Total Power Required Must Not Exceed Maximum Chassis Power Rating.
All Units Have Universal AC Input And Power Factor Correction.
Output Modules Are Normally Factory Fitted (or can be customer fitted)
Output Voltages Can Be Factory Preset If Required Or Customer Adjusted
All Output Modules Have Power Good Signal, Output Inhibit, Sense & Voltage Trim
Chassis Options Include, Mains Power Fail Signal, Global Enable / Inhibit, And House Keeping Supply Voltage.   

Please Contact The ALL PSU Sales Office For Assistance For Selecting Output Modules Or For A Copy Of The Full Data Sheet For This Range.

Specifications May Change Without Notice, E&OE. ALL PSU Terms & Conditions Apply.

ALL PSU Ltd Unit D6 Laser Quay, Culpeper Close, Medway City Estate
Rochester, Kent, ME2 4HU, Tel: 01634 725527, Fax: 01634 739111
Email: sales@allpsu.co.uk